Remote Machinery Damper Sign

Remote Machinery Damper Sign – FS0101

This remote machinery damper sign shows the standard IMO fire control symbol for a remote control point, the fire damper duct symbol enclosed in a triangle, marked with the letter “M” to identify the remote control station for dampers serving machinery spaces. It follows the standard IMO fire control symbol convention used on fire control plans and at the control point itself, so the symbol is recognisable to crew regardless of language.

Where this remote machinery damper sign is used

A remote control point lets crew close a fire damper from outside the space it serves, so the damper can still be shut even when the compartment itself is filled with smoke or is otherwise unsafe to enter. The triangle around the duct symbol marks this as a remote-operated control position rather than the damper itself, which is instead marked with the plain machinery fire damper sign. This remote machinery damper sign identifies the control point covering dampers serving machinery spaces specifically, mirroring the remote accommodation damper sign used for the accommodation zone.

This sign is fixed at the remote control point, typically on a control panel, at a manned control station, or beside a bank of remote pull-cables or levers, so crew responding to a fire alarm can quickly find the correct control for the machinery zone without wasting time reading unlabelled equipment. Machinery spaces carry a high fire risk from fuel, lubricants, and hot surfaces, so a fast, correctly identified damper shutdown matters directly to containing a machinery space fire.

Closing fire dampers from a remote point cuts off one of the main paths smoke and flame can travel through the ventilation system, without requiring crew to approach the fire itself. Remote control arrangements are only useful if the control point is clearly marked and consistently labelled, since a control that cannot be identified quickly under smoke and time pressure is little better than no remote control at all.

This sign is checked during SOLAS fire safety surveys, where the surveyor confirms that remote control points for dampers are clearly marked, correctly labelled for the space they serve, and remain accessible and unobstructed. Correct labelling of remote control points is a standard item reviewed during these inspections, since a mislabelled or missing sign can slow down both routine testing and an actual emergency response.

New crew should be shown the location and correct operation of every remote damper control on board during safety familiarisation and fire drills, since hesitating to find or identify the right control can allow smoke to spread further before the dampers are finally closed. Clear, consistent labelling like this remote machinery damper sign removes that hesitation.

Consistent signage also matters during a routine walk-through inspection, since a remote control point without a clear label can slow down an auditor trying to confirm the vessel’s fire control plan matches what is actually fitted on board. Fitting this remote machinery damper sign at the correct control point keeps the fire control plan easy to verify against the equipment in place.

Remote control arrangements should be tested regularly as part of the vessel’s routine fire safety equipment checks, since a control that fails to close its dampers during an actual emergency defeats its purpose. Marking each control point clearly with this remote machinery damper sign also makes it easier for the crew member responsible for testing to locate every remote control on board without needing to consult a separate equipment list.

Technical specifications:
SKU: FS0101
IMPA: 33.6791
ISSA: 47.567.91
Compliant: IMO Resolution A.1116(30)

• Fire-retardant marine-grade material
• Available in non-glow vinyl, general purpose glow, or DNV Wheelmark certified Class C / Class D photoluminescent film
• Waterproof and saltwater resistant
• Glossy wipe-clean finish
• Peel-and-stick installation, no tools or drilling

Supplied ready to apply directly at the remote control point. Available in the standard size shown above.

This sign is produced to IMO fire control symbol specifications for consistent recognition across international fleets. Need a different size or a custom layout? Contact us for a quote.