Wear Hard Hat Sign

Wear Hard Hat Sign – ISO 7010 Mandatory Symbol MS0002

The Wear Hard Hat Sign (MS0002) carries the ISO 7010 M014 blue-circle mandatory pictogram, showing a profile head wearing a safety helmet on a photoluminescent yellow-green ground. It tells crew, contractors, and visitors that an approved hard hat must be worn before entering the marked space, deck area, or work zone. Built for long-term shipboard service, the sign is manufactured to hold its clarity through vibration, humidity, and salt exposure across cargo holds, engine rooms, and open decks.

Falling tools, low deckhead fittings, suspended loads under a crane, and overhead pipework are constant hazards aboard any vessel. A dropped spanner from a upper platform or an unguarded overhead valve can cause a serious head injury in seconds. The Wear Hard Hat Sign gives masters and safety officers a permanent, unmissable reminder at the point of entry, backing up toolbox talks and permit-to-work systems with signage that never forgets to remind the next person through the door.

Why Head Protection Matters

Head injuries are among the most severe outcomes recorded in maritime incident reports, frequently leading to lost-time injury, medical evacuation, or worse. Cargo operations, engine room maintenance, and dry-dock periods all raise the risk of falling objects and head strikes on low pipework or hatch coamings. Under the ISM Code, the Company is required to identify these risks and post instructions at the hazard itself rather than relying solely on induction briefings. The Wear Hard Hat Sign discharges that obligation visibly, at eye level, in every language a mixed-nationality crew can read through pictogram recognition alone.

Compliance and Certification

Manufactured to the ISO 7010 M014 mandatory-action pictogram on photoluminescent substrate, this sign supports the safety sign provisions referenced in SOLAS Chapter II-2 and forms part of a documented PPE compliance package reviewed during flag State inspection, Port State Control, and class surveys with DNV, ABS, and Lloyd’s Register. Retaining the IMPA 33.5642 and ISSA 47.556.42 codes against this listing keeps procurement and audit records aligned for fast reordering across a fleet.

Installation Recommendations

Position the sign at the entrance to cargo holds, engine rooms, workshops, mast houses, and any deck area with crane or lifting operations, and repeat it near hatch coamings and low headroom passages. The rigid aluminium composite panel suits exterior bulkheads exposed to weather and salt spray, while the self-adhesive vinyl format is suited to interior doorways and equipment lockers. Wipe the surface clean and dry before fitting, and keep the sign clear of cable trays, fire hoses, or stowed gear that could block the crew’s line of sight.

• 425 x 425mm rigid or self-adhesive format for steel, aluminium or GRP surfaces (also available in 150 x 150mm and 225 x 225mm)
• Photoluminescent base charges under ambient light and remains visible during blackout or power loss
• UV-stable, saltwater and corrosion-resistant construction rated for exterior deck and engine room service
• Fixing options include self-adhesive vinyl, rigid ACM panel with pre-drilled holes, or mechanical fasteners
• Manufactured to the ISO 7010 M014 mandatory pictogram standard for consistent recognition fleet-wide

Order the Wear Hard Hat Sign (MS0002) today to close a PPE signage gap before your next survey or inspection. Bulk pricing is available for fleet-wide rollouts, and our team can match sizing and substrate to your vessel’s existing signage package on request.

Complete your onboard PPE programme with our Hazard Signs range and Fire Fighting Signs for full coverage of mandatory, warning, and emergency signage requirements.