Remote Release Station Aerosol Sign

Remote Release Station Aerosol Sign – IMO A.654(16) Fire Control Symbol FS0255

This Remote Release Station Aerosol sign identifies the location of the manual actuator for the vessel’s fixed aerosol fire-extinguishing system, shown by the standardised aerosol canister pictogram, matching exactly what appears on the vessel’s fire control plan for this location. As SKU FS0255 in the Fire Fighting Signs range, it is designed for permanent fixing outside the protected compartment, at the release point crew use to discharge the aerosol system from a position of safety.

Aerosol fire-extinguishing systems suppress fire by dispersing a fine solid particulate that interrupts the combustion process, and because the system must be triggered from outside the protected space, fast identification of the remote release station is critical to a safe, effective response. Clear signage also supports routine fire equipment rounds, where crew confirm the release mechanism, tamper seal and instructions are all present and undamaged. The photoluminescent background of this sign keeps the release station identifiable during a blackout, exactly when triggering the system safely becomes part of the crew’s firefighting response.

Why Remote Release Station Aerosol Identification Matters

Crew responsible for fire system maintenance need to locate the aerosol remote release station quickly for scheduled inspections and system tests, since the system’s effectiveness depends on the release mechanism being unobstructed and ready to trigger without delay. Correctly signed release stations also support fire drills and system familiarisation, helping the fire team understand exactly where to actuate the system and confirm the protected space is clear beforehand. This distinction matters particularly given aerosol systems are typically installed with multiple release points, where confirming the correct station for a given space is part of confident, safe operation.

Compliance and Certification

This sign reproduces the fire control symbol set derived from IMO Resolution A.654(16) and continued under the current ISO 17631 standard for fire control plan graphics, matching what flag-state surveyors and classification societies expect to see identifying aerosol system release points. SOLAS Chapter II-2 sets requirements for fixed fire-extinguishing systems including their means of release, and correctly labelled release stations are part of demonstrating that this system is genuinely maintained and ready during Port State Control inspections and class surveys. Fitting SKU FS0255 keeps your aerosol system signage matched to the fire control plan surveyors will reference.

Installation Recommendations

Fix this sign directly above or beside the remote release station, using the pre-drilled fixing holes for a permanent mechanical fixing or the self-adhesive backing on smooth painted surfaces. In machinery spaces and access alleyways exposed to vibration, heat and oily residue, a screw or rivet fixing will outperform adhesive over the vessel’s operating life, and the sign should remain visible even when nearby equipment is temporarily stowed. Check the sign periodically during routine fire equipment rounds to confirm it remains legible and the release station beneath it is unobstructed.

• Standard IMO/ISO 17631 fire control symbol – aerosol canister pictogram
• Photoluminescent base for visibility during blackout or power failure
• 150x150mm rigid or self-adhesive format to suit steel, aluminium or GRP surfaces
• UV-stable, corrosion-resistant construction for machinery space and access alleyway use
• Matches fire control plan symbols exactly for fast, confident equipment identification

Order the FS0255 Remote Release Station Aerosol sign to keep your vessel’s fixed aerosol fire protection system clearly identified before your next drill or inspection. Safety Sign Hub stocks the complete IMO fire control symbol range and ships marine-grade signage across Australia and to vessels in port.

Browse the full Fire Fighting Signs range for every fire control plan symbol your vessel needs, or see our Hazard Signs for ISO 7010 warning pictograms to complete your safety signage programme.