Foam Wheeled Fire Extinguisher Sign

Foam Wheeled Fire Extinguisher Sign – IMO Fire Control Symbol FS0187

The Foam Wheeled Fire Extinguisher sign is a mandatory IMO fire control symbol used to mark the location of a large, trolley-mounted foam fire extinguisher, on board a vessel. Recognised under IMO Resolution A.654(16) and reproduced to ISO 17631, this pictogram allows crew, surveyors, and shore-based emergency responders to identify a foam wheeled fire extinguisher position instantly, regardless of the language they speak.

The symbol depicts a large red extinguisher cylinder mounted on a single wheel with a trolley handle, featuring a yellow base band and labelled “F” beside it, denoting a mobile foam unit specifically as distinct from the smaller hand-held portable extinguisher signs. This design forms part of the internationally standardised library of fire control symbols found on fire control plans, damage control plans, and general arrangement drawings across commercial vessels, offshore installations, and naval ships.

Why the Foam Wheeled Fire Extinguisher Location Matters

A foam wheeled fire extinguisher is a high-capacity mobile appliance designed for larger flammable liquid fires in machinery spaces, cargo areas, and paint lockers, where its smothering foam blanket can tackle fires beyond the range of a hand-held unit. Because these mobile units are strategically positioned near high-risk machinery spaces, crew need a clear, instantly recognisable sign to locate the nearest foam wheeled extinguisher quickly during a fire emergency or drill.

Because rapid, unambiguous identification of fixed fire-fighting equipment is so important during a fire emergency, SOLAS Chapter II-2 and the Fire Safety Systems Code require clear signage marking the position of every fire extinguisher, including larger wheeled units, so crew unfamiliar with a particular vessel, relief officers, and visiting surveyors can find them without delay. This sign is typically mounted directly above or beside the storage bay for the wheeled unit, and is also reproduced on the fire control plan posted at the gangway and bridge.

Compliance and Certification

This Foam Wheeled Fire Extinguisher sign is manufactured to comply fully with IMO Resolution A.654(16) and ISO 17631 symbol requirements, ensuring the pictogram, colour scheme, and proportions match the standard expected during port state control inspections, classification society surveys, and SOLAS compliance audits. Non-standard or incorrectly proportioned signage is a common source of survey deficiencies, so every FS0187 sign is checked against the current IMO symbol register before it leaves our warehouse.

Manufactured from durable photoluminescent, self-adhesive vinyl, this sign charges under normal ambient lighting and glows for an extended period in the dark, ensuring the foam wheeled fire extinguisher location remains identifiable even during a blackout or power failure. This self-luminous performance is especially valuable in machinery spaces and cargo areas where visibility can drop sharply during a fire event.

Installation Recommendations

For best results, mount this sign at eye level directly above or beside the storage bay or securing point for the foam wheeled extinguisher, in a position that stays visible and unobstructed by cabling, fittings, or nearby equipment. Clean the mounting surface thoroughly to remove any dust, oil, or moisture before applying the self-adhesive backing, ensuring a permanent bond that will hold up to the conditions typical of a machinery space or cargo area location.

Vessels undergoing a fire control plan update, newbuild fit-out, or SOLAS compliance retrofit should ensure this sign is included alongside the complete suite of IMO fire control symbols so that the printed fire control plan matches the physical signage installed throughout the ship. Surveyors routinely cross-check the fire control plan against signage actually fitted onboard, making consistency between the two a key focus area during flag state and classification inspections.

Key features of this Foam Wheeled Fire Extinguisher sign include:

• Complies with IMO Resolution A.654(16) and ISO 17631 fire control symbol standards
• Photoluminescent vinyl construction for visibility during power loss or low-light conditions
• Self-adhesive backing for fast, permanent installation on panels and bulkheads
• Waterproof and saltwater resistant for long-term use throughout the vessel
• Matches the standard pictogram used fleet-wide on fire control plans for consistent crew recognition

This foam wheeled fire extinguisher sign is a small but essential part of a compliant fire control plan. Every foam wheeled fire extinguisher sign we supply is checked for compliance before dispatch. Order your Foam Wheeled Fire Extinguisher sign today to keep your vessel’s fire control plan and physical signage fully aligned, supporting crew safety, SOLAS compliance, and a smooth outcome at your next port state control or classification survey.

For more information on the international symbol standards referenced above, see the International Maritime Organization resolution library. Browse our full range of Fire Fighting Signs for more IMO-compliant fire control signage for your vessel.