Do Not Touch Tag

Do Not Touch Tag for Surface and Contact Hazard Control

The Do Not Touch Tag is a punched hang-tag used aboard ships and in port and terminal facilities to warn personnel not to make physical contact with a specific surface, component, or piece of equipment. It is used where touching an item could result in injury from heat, electrical shock, contamination, or disturbance of a sensitive process, and where the hazard is contact-specific rather than covered by a broader operational prohibition such as Do Not Operate or Do Not Start.

When to Use This Tag

Attach the Do Not Touch Tag to freshly painted or coated surfaces, hot components such as exhaust manifolds or steam lines, sensitive instrumentation, or any item where contact could cause injury, contamination, or damage. It is a standard component of lockout/tagout (LOTO) and permit-to-work systems, giving other crew or contractors an immediate, unambiguous instruction before they come into physical contact with the item.

Design and Materials

Each tag features a red prohibition circle-and-slash symbol over a hand pictogram, above a bold “DO NOT TOUCH” panel, printed on fire-retardant, photoluminescent laminated card stock a long-duration afterglow. This ensures the warning remains visible during power loss or in poorly lit compartments such as engine rooms, paint stores, and workshops. The card is waterproof and resistant to saltwater exposure, making it suitable for prolonged use in marine and offshore environments. A reinforced punched hole at the top allows the tag to be secured with a cable tie or wire loop.

Installation and Use

Loop a cable tie or wire tie through the punched hole and secure the tag directly to the affected surface or equipment, ensuring the warning panel faces outward and remains clearly legible to anyone approaching it. The “Authorised by” and “Date” fields at the base of the tag should be completed by the person applying it, providing a simple accountability record consistent with standard lockout/tagout and permit-to-work documentation practices. Because the tag is a physical hang-tag rather than an adhesive label, it can be quickly attached, removed, or transferred between items as required without leaving residue or damaging equipment surfaces.

Compliance and Standards

The tag’s pictogram and wording follow internationally recognised hazard communication conventions used across the maritime and industrial safety sectors, aligning with IMO Resolution A.1116(30) guidance on shipboard signage and supporting broader workplace contact-hazard obligations such as those set out by Safe Work Australia. Vessel operators should confirm the tag meets any flag-state or class-specific requirements applicable to their permit-to-work and isolation procedures.

Ordering Information

This Do Not Touch Tag is supplied under IMPA code 33.2531 and ISSA code 47.525.31, sized 150x75mm. It forms part of Safety Sign Hub’s full Tie Tags range, which covers the complete set of lockout/tagout and hazard-identification tags used across marine vessels, offshore installations, and port facilities. Contact Safety Sign Hub for bulk ordering or custom tag requirements.